 |
||||||||||||||
 |
||||||||||||||
|
||||||||||||||
 |
||||||||||||||
| The bale is pulled by the winch with a 2" (5 cm) wide nylon strap and 2 steel hooks. Two ramps allow to load the bale on the board and the adjustable telescopic arms hold it in the right position during unrolling.
An exclusive mechanism insures parallel deployment of the telescopic arms for even unrolling. This mechanism is easy to adjust with a pin and can be activated or deactivated as desired. |
||||||||||||||
 |
||||||||||||||
| The telescopic arms are equipped with 18 in (46 cm) diameter discs with spikes acting as unrolling axis. These discs insure a good grab on the bale for complete unrolling.
The board has a mechanical conveyor providing a good grab on the bale. Teflon plates prevent premature wear and insure a more quiet operation. |
||||||||||||||
 |
||||||||||||||
 |
||||||||||||||
| An bale separator (comb) increses the grab of the conveyor on the bale for complete unrolling.
The position of the bale separator (comb) can be adjusted with a lever for continuous unrolling. |
||||||||||||||
 |
||||||||||||||
| A grating insures the safety of the operator during loading and unrolling. This grating can be folded forward for easy manoeuvering or storage in low height spaces.
Once the bale is loaded, the ramps are stored on each side of the board. The cleared platform is covered with a skid-proof surface. During operation, a shield prevents buildup in the front wheels. |
||||||||||||||
|
|
||||||||||||||
|
784 Principale Street, Wickham (Québec) Canada J0C 1S0 Telephone: (819) 398-6822 Fax: (819) 398-6810 E-mail: info@wicideal.com Internet: www.wicideal.com
|
||||||||||||||