Hydraulic Alley Scraper
  • Adapts to alleys measuring 6 to 14 ft (1.8 à 4.2 m) in width.
  • Articulated scrapers that adapt to the slope of the alley.
  • Compatible with single and multiple gutters.
In “scraping” mode, the scrapers are pulled towards the gutter by a 2 x 36 in (5 x 90 cm) or 2 1/2 x 36 in (6.25 x 90 cm) hydraulic cylinder.

A reversed system with the hydraulic cylinder pushing the scrapers is also available.

Single gutter installation:
2 1/2 x 96 in (6.25 x 240 cm) hydraulic cylinder
The track (rail) comes in 12 ft (3.6 m) sections and is bolted to the fl oor with anchors located 12 ft (3.6 m) from each other. This system simplifi es the installation without affecting the concrete fl oor.
Two hydraulic units with a 15 gallon (68 L) tank are available: a standard system with a 5 HP electric motor and a faster system with a 7.5 HP motor.

A single hydraulic unit is powerful enough to clean up to 4 gutters (with additional scrapers).

The control panel has a 24 hour timer allowing to program many cleaning sessions and a stop position sensor. It also comes with a manual “On/Off” switch. The panel is pre-wired and ready to be connected..
IDEAL MACHINERY INC.
784 Principale Street, Wickham (Québec) Canada J0C 1S0
Telephone: (819) 398-6822
  Fax: (819) 398-6810
E-mail:
info@wicideal.com    Internet: www.wicideal.com

The content of this site is owned by IDEAL MACHINERY INC.
Copyright 2008.